Description

The 7200W 8KVA IGBT Double Conversion Inverter Stabilizer is designed to respond effectively to voltage fluctuations in power systems.

Product advantages

We can make special samples for voltage stabilizers according to customers' requirements.

All customized solutions and production preparation can be completed efficiently before shipment to ensure consistent delivery schedule and quality.

If you have OEM / ODM project requirements, please contact us in time and provide design drawings or technical documents, we will provide professional support and co-development services.

Raw material preparation, product production, shipment and document preparation can be done by us.

Technical parameters

Model	HIS-8000
Input parameters
Active Power	7200W
Stabilization range	90-310V
Nominal input frequency	50Hz
Input frequency range	43-57Hz (Auto detection)
Power load curve
Low voltage protection	90V
High voltage protection	310V
Input power	0.99
Max input current	47A
No-load power	65W
Startup mode	Soft start
Output parameters
Output voltage precision	220~230±2%
Output frequency	50Hz
Output voltage waveform	Pure Sine Wave
Voltage stabilizer speed	0ms
Max out put current	36A
Protection time	<200ms
Peak efficiency	97%
Protections
Low voltage protection input voltage	<90V
High voltage protection input voltage	>310V
Overload protection	yes
High temperature protection	>85°
Overload protection	5s @105-150% load
Short-circuit protection	yes
Anti-high-frequency range	150KHZ-80MHz
Components
Switch model	/
MCB type	50A
Design
Display type	LCD
Waterproof and dustproof rating	IP20
Plug type	/
The dimensions of the housing of the stabilizer, mm (widthdepthheight)	505370105
Weight of stabilizer, kg	11

Connecting the voltage stabilizer must be done by a qualified professional, and following safety procedures.

Please refer to the user manual for details.

Application scenario

Air conditioner

Kitchen

compute equipment and office equipment

televisions

audio and video equipment

lighting equipment

Design

Please note

Emergency protection

Only models with modern protection systems are suitable for private homes and summer houses. The algorithm of operation is as follows: in case of overheating, overloading or internal faults, the ‘bypass’ function is activated; in case of short-circuits, high or low mains voltage, the device is switched off and the automatic start-up function is also important, because it will return to normal operation as soon as the factors that triggered the protection have disappeared.

Decide in advance where and how to place the stabiliser

It is most convenient to install a device that can protect a single load or a group of loads in the vicinity. It is recommended to install a ‘network-wide’ stabiliser in the area of the input distribution board. In both cases it is necessary to ensure that the equipment is installed on site.

There is sufficient space to ensure that it is safely placed in the operating position;.

The temperature and humidity indicators correspond to acceptable levels. The temperature and humidity indicators correspond to acceptable values.

Easy access to its controls and indicators, as well as on/off buttons and input/output connectors;.

There are no high concentrations of dust, strong vibrations or chemically active environments (a list of prohibitions can be found in the technical documentation);.

Ensure free ventilation.

If the above points are not followed, you should consider another model or change the installation location.

Get in Touch New

We also recommend that you consider the factors listed in the table when placing

Parameter name	Parameter Description
Allowable Temperature Range	Voltage regulators are heat-loving devices and therefore should not be placed outside or in unheated rooms.
Noise level	The activation of mechanical elements in relays and electromechanical models is accompanied by a rather loud click or clank. The operation of powerful inverters and semiconductor models is not silent either - their forced ventilation systems generate noise. For this reason, we do not recommend placing powerful devices in bedrooms, living rooms or kitchens.
Requirements for protection against external influences	Dust, humidity, strong vibrations and harsh environments are undesirable. The equipment must be installed in a dry, dust-free, gas-free area, away from sources of ignition and explosive hazardous substances.