HIS

The high inverter stabilizer needs to be installed in a place without direct sunlight and danger of flooding. The device should be placed so air can circulate freely around and inside the enclosure.

1.It is prohibited to install and operate the stabilizer in the following cases:

2.In rooms with explosive or chemically active atmospheres;

3.In open (outdoor) areas under conditions of high humidity, vibrations, dust, body exposure to dripping or splashing;

4.Where it is not possible to provide sufficient air exchange for natural or forced (depending on the model) cooling of the heating parts of the stabilizer;

5.On soft , velvety surfaces and within 1 meter of the heating system.